Rockwell Automation 842E EtherNet/IP Absolute Encoder User Manual - Manual (Page 13)

Rockwell Automation Publication 842E-UM001A-EN-P May 2012 5
Encoder overview Chapter 2
Configurable parameters The EtherNet/IP technology allows for certain encoder parameters to be
configured over the network.
• Counting direction
• Counts per revolution
• Preset value
• Velocity output
• IP addressing
The electronic data sheet file The electronic data sheet (EDS) file contains all the information related to the
measuring-system-specific parameters as well as the operating modes of the 842E
EtherNet/IP encoders. The EDS file is integrated using the EtherNet/IP
network configuration tool to configure and place in operation the 842E
EtherNet/IP encoder
For more information, go to www.rockwellautomation.com/resources/eds/ and
search on “842E.”