Rockwell Automation 842E EtherNet/IP Absolute Encoder User Manual - Manual (Page 52)

44 Rockwell Automation Publication 842E-UM001A-EN-P May 2012
Chapter 7 Diagnostics and troubleshooting
Red flashing Warning, connection time-out
Cleared by reset or a new connection
Red Error
IP address has been assigned to another device already.
Green/Red flash Self-test at power-on
LED Mod Description
OFF No power
Green Device operational
Green flashing Standby/device not configured, no IP address assigned
Red flashing Warning, but device still operational
or
Firmware update in progress
Red Error, device not operational
Green/red flashing Self-test at power-on
LED Encoder Description
OFF No power
or
No IP address
Green flashing Warning
Wrong parameter
Green Device operational
Red flashing Warning, but device still operational
or
Firmware update in progress
Red Error
Encoder error
Green / red flashing Self-test at power-on
LED Net Description