Network tab – Rockwell Automation 842E EtherNet/IP Absolute Encoder User Manual User Manual
Page 47
Advertising
![background image](/manuals/577370/47/background.png)
Rockwell Automation Publication 842E-UM001A-EN-P May 2012
39
Configuring the 842 E encoder using RSLogix 5000
Chapter 6
Network tab
The Network tab contains read-only data that is populated when the controller
goes online.
Network Topology:
This displays the current network topology as either linear/
star or ring.
Network Status:
This displays the current network status as normal, ring fault,
or unexpected loop detected.
The Refresh Communication link appears when communication with the
encoder has failed. Click Refresh Communication to attempt to restart
communication with the encoder.
Advertising