Rockwell Automation 842E EtherNet/IP Absolute Encoder User Manual User Manual
Page 75
Advertising
Rockwell Automation Publication 842E-UM001A-EN-P May 2012
67
RSLogix 5000 sample code
Appendix B
Using an explicit message
configuration to obtain the
encoder’s run-time in
seconds
This example is similar to the previous one, “Using an explicit message
configuration to read preset encoder value” on page 63.
1.
Create a new message data type named
Run_Time_Message and a DINT
named
Run_Time Seconds.
Advertising