Ethernet address – Rockwell Automation 842E EtherNet/IP Absolute Encoder User Manual User Manual
Page 41
Rockwell Automation Publication 842E-UM001A-EN-P May 2012
33
Configuring the 842 E encoder using RSLogix 5000
Chapter 6
Ethernet address
When the controller is offline, the ethernet address can be set. You have three
options:
•
When a private network is used, click on the Private Network radio
button. Enter a value of 1…254 for the last segment (octet) of the address.
Be sure not to duplicate the address of an existing device. In the preceding
example, the address of the EtherNet/IP encoder is 192.168.1.123.
•
When multiple networks exist, you may choose to set the address to some
other value. when offline, simply click the IP address radio button and
enter the desired address
•
Click the Host Name radio button and type in the name of the host. In
the example below, the host name is QPACK4.