Rockwell Automation 700-HX Multifunction Digital Timer - Manual (Page 15)

Publication 700-UM002B-EN-D - June 2010
3-4 Functions
Operation in Run Mode
Present Value and Set Value
These items are displayed when the power is turned ON. The present value is
displayed in the main display and the set value is displayed in the sub-display.
The values displayed will be determined by the settings made for the time
range and the timer mode in function setting mode.
Present Value and ON Duty Ratio (Output Mode = Z)
The present value is displayed in the main display and the ON duty ratio is
displayed in the sub-display. “SET1” lights at the same time.
Set the ON duty ratio used in ON/OFF-duty adjustable Repeat Cycle (Z) as a
percentage.
If a cycle time is set, cyclic control can be performed in ON/OFF-duty
adjustable Repeat Cycle simply by changing the ON duty ratio.
Present Value and Cycle Time (Output Mode = Z)
The present value is displayed in the main display and the cycle time is
displayed in the sub-display. “SET2” lights at the same time.
Set the cycle time used in ON/OFF-duty adjustable Repeat Cycle (Z).
Present value
Set value
Present value
ON duty ratio
Present value
Cycle time
When Output Mode Z Is Selected
Set each digit for the ON duty ratio using the corresponding keys.
(The keys for the 4th digit cannot be used.)
Set each digit for the cycle time using the corresponding keys.
Set each digit for the set value using the corresponding keys.
When Output Mode Is Not Z