Rockwell Automation 700-HX Multifunction Digital Timer - Manual (Page 44)

Publication 700-UM002B-EN-D - June 2010
Appendix-3
Run Mode when Output Mode = Z
Function Setting Mode
Parameter
name Parameter Setting range Dafault
value Unit Set
value
Present
value,
cycle
time Cycle
time 0.00 … 99.99
(Time range: --,--s)
0.00 s
0.0 … 999.9
(Time range: ---,-s)
0.0 s
0 … 9999 (Time range: ----s) 0 s
0 : 00 … 99 : 59
(Time range: --min--s)
0 : 00 min; s
0.0 … 999.9
(Time range: ---,-min)
0.0 min
0 … 9999
(Time range: ----min)
0 min
0 : 00 … 99 : 59
(Time range: --h--min)
0 : 00 h; min
0 .0 … 999.9
(Time range: ---,-h)
0.0 h
0 … 9999 (Time range:
----h)
0 h
0.000 … 9.999
(Time range: -,---s)
0.000 s
Present
value Same as cycle time above Same
as left Same
as left
Present
value,
ON
duty
ratio ON
duty
ratio 0 … 100 0 %
Present
value Same as cycle time above Same
as left Same
as left
Parameter name Parameter Setting range Dafault
value Unit Set
value
Time range timr --,--s/---,-s/----s/--min--s/
---,-min/----min/--h--min/
---,-h/----h/-,---s ---
Timer mode timm up down up ---
Output mode outm a a-1 a-2 a-3 b b-1
d e f s
a ---
Output time otim hold 0.01 to 99.99 hold s
Input signal width iflt 20ms 1ms 20ms ---
Key protect level kypt kp-1 kp-2 kp-3
kp-4 kp-5 kp-6
kp-7
kp-1 ---