Rockwell Automation 700-HX Multifunction Digital Timer - Manual (Page 45)

Publication 700-UM002B-EN-D - June 2010
Appendix-4
Settings for Repeat Cycle Operation
Run Mode
Function Setting Mode
Parameter name Parameter Setting range Dafault
value Unit Set
value
Present
value,
OFF set
time OFF set
time 0.00 … 99.99
(Time range: --,--s)
0.00 s
0.0 … 999.9
(Time range: ---,-s)
0.0 s
0 … 9999
(Time range: ----s)
0 s
0 : 00 … 99 : 59
(Time range: --min--s)
0 : 00 min; s
0.0 … 999.9
(Time range: ---,-min)
0.0 min
0 … 9999
(Time range: ----min)
0 min
0 : 00 … 99 : 59
(Time range: --h--min)
0 : 00 h; min
0 .0 … 999.9
(Time range: ---,-h)
0.0 h
0 … 9999
(Time range: ----h)
0 h
0.000 … 9.999 (Time
range: -,---s)
0.000 s
Present
value Same as OFF set time
above Same
as left Same
as left
Present
value,
ON set
time ON set
time Same as OFF set time
above Same
as left Same
as left
Present
value Same as OFF set time
above Same
as left Same
as left
Parameter name Parameter Setting range Dafault
value Unit Set
value
OFF time range oftr --,--s/---,-s/----s/--min--s/
---,-min/----min/--h--min/
---,-h/----h/-,---s --,--s ---
ON time range ontr --,--s/---,-s/----s/--min--s/
---,-min/----min/--h--min/
---,-h/----h/-,---s --,--s ---
Timer mode timm up / down up ---
ON/OFF start mode totm toff / ton, / toff-1 /
ton,-1
toff ---
Input signal width iflt 20ms / 1ms 20ms ---
Key protect level kypt kp-1 / kp-2 / kp-3 / kp-4
kp-5 / kp-6 / kp-7
kp-1 ---