Rockwell Automation 700-HX Multifunction Digital Timer - Manual (Page 43)

Publication 700-UM002B-EN-D - June 2010
Appendix-2
List of Settings Fill in your set values in the set value column of the following tables for quick
reference.
Timer/Repeat Cycle Selection Mode
Settings for Timer Operation
Run Mode when Output Mode is Not Z
Parameter
name Parameter Setting range Dafault
value Unit Set
value
Timer/
Repeat
Cycle
selection func tim / twin tim ---
Parameter name Parameter Setting range Default
value Unit Set
value
Present
value, set
value Set value 0.00 … 99.99
(Time range: --,--s)
0.00 s
0.0 … 999.9
(Time range: ---,-s)
0.0 s
0 … 9999
(Time range: ----s)
0 s
0 : 00 … 99 : 59
(Time range: --min--s)
0 : 00 min; s
0.0 … 999.9
(Time range: ---,-min)
0.0 min
0 … 9999
(Time range: ----min)
0 min
0 : 00 … 99 : 59
(Time range: --h--min)
0 : 00 h; min
0 .0 … 999.9
(Time range: ---,-h)
0.0 h
0 … 9999
(Time range: ----h)
0 h
0.000 … 9.999
(Time range: -,---s)
0.000 s
Present
value Same as set value Same
as left Same
as left