Rockwell Automation 700-HX Multifunction Digital Timer - Manual (Page 42)

1 Publication 700-UM002B-EN-D - June 2010
Appendix
Using the Operation Keys Timer Operation
Repeat Cycle Operation
1 ＋
1 ＋
Power ON
Timer/Repeat Cycle selection
Timer (Except for Z mode)
PV/SV
Timer (Z mode)
PV/ON duty ratio
PV/cycle time
Time range
Timer mode
Output mode
Output time
Input signal width
Key protect level
1 s min. 3 s min.
3 s min. 1 s min.
Timer/Repeat Cycle selection mode Run mode Function setting mode
Operation stopped
Can be in operation
Set value upper limit
Output on alarm set
value
Output on alarm monitor
value
1 ＋
1 ＋
Power ON
Timer/Repeat Cycle selection
PV/SV
Timer (Z mode)
PV/ON duty ratio
PV/cycle time
1 s min. 3 s min.
3 s min. 1 s min.
Timer/Repeat Cycle selection mode
Run mode Function setting mode
Operation stopped
Can be in operation
PV/OFF set time
PV/ON set time
Time range
Timer mode
Output mode
Output time
Input signal width
Key protect level
Set value upper limit
Output on alarm set
value
Output on alarm monitor
value
NOTE : All setting changes are performed using
keys .
The flowcharts above outline the procedure for
all models. For details on specific models, refer to
Timer operation and Repeat Cycle operation in
Chapter 3.