Rockwell Automation 1336-GM6 Enhanced DeviceNet Communications Module - Manual (Page 17)

Overview 1-5
Hardware and Parts Description The hardware included with the adapter depends on the adapter that
you have.
1203-GU6 Module Hardware
Figure 1.3 illustrates and the following table lists the main parts of the
1203-GU6 Enhanced DeviceNet communications module:
Figure 1.3 Parts of the 1203-GU6 Module
2
3
4
5
1
Number Part Description
1 DIN Rail Mount Securely attaches and electronically grounds the module to the DIN rail.
2 SCANport Connection Provides a standard SCANport 8-pin circular mini-DIN connector for the SCANport cable.
3 RS-232 Serial Port Provides a connection for terminals capable of RS-232 serial communications. This port can
be used to edit the module’s parameters, download a file needed to perform a flash to the
module’s operating code, and support devices that monitor and test the module. A 1203-SFC
serial cable and a PC running a terminal emulation program or a VT100-compatible terminal
are required to use this port.
4 Bi-Color LEDs Indicate the status of the DeviceNet media channel, of the SCANport connection, and of the
module. For more information, refer to Chapter 8, Troubleshooting.
5 DeviceNet Connection Provides a 5-pin Phoenix connector to attach the module to the network.
Not
shown
5-Pin Plug-In
Connector This part is supplied with the module. The 5-pin plug-in connector (P/N 22112-215-01) is a
connector to attach to the cable.
Not
shown
10-Pin Plug-In
Connector This part is supplied with the module. The 10-pin plug-in connector (P/N 94220605) is a
connector to attach to the cable.