Rockwell Automation 1336-GM6 Enhanced DeviceNet Communications Module - Manual (Page 43)

Configuring the 1203-GU6 Enhanced DeviceNet Module Using a Serial Connection 3-13
Viewing DF-1 Statistics If you want to check for bad packets or perform other serial port
debugging procedures, you can view DF-1 statistics. You may also
want to use the DF-1 statistics if you are developing your own DF-1
driver. To view DF-1 statistics, follow these instructions:
1. Establish a serial connection to access the module’s software.
Refer to the “Establishing a Serial Connection to the Module”
section earlier in this chapter.
2. Press 4 to select 4> Display DF1 Statistics. The first parameter
appears.
Figure 3.12 DF1 Statistics