Rockwell Automation 1336-GM6 Enhanced DeviceNet Communications Module - Manual (Page 57)

Configuring a Scanner to Communicate with the Adapter 5-3
Figure 5.3 Scanlist Page in the Device Edit Dialog Box
6. Select the Automap on Add box (a check mark will appear).
7. Under Available Devices, select the SCANport product, and then
click > (Right Arrow) to add it to the scanlist.
Figure 5.4 Scanlist Page in the Scanner Module Dialog Box
8. Under Scanlist, select the SCANport product, and then click Edit
I/O Parameters. The Edit I/O Parameters dialog box appears.