Rockwell Automation 1336-GM6 Enhanced DeviceNet Communications Module - Manual (Page 39)

Configuring the 1203-GU6 Enhanced DeviceNet Module Using a Serial Connection 3-9
Navigation Techniques To perform any of the functions of the module’s software (e.g.,
editing parameters), you need to know the following navigation
techniques:
Editing the Module’s Parameters If you do not want to use the module’s default settings, you must edit
its parameters. Refer to Appendix B, Enhanced DeviceNet Adapter’s
Parameters, for a detailed list of parameters and how to configure
them.
1. Establish a serial connection to access the module’s software.
Refer to the Establishing a Serial Connection to the Module
section earlier in this chapter.
Press: To
1, 2, 3, 4, 5, 6, 7, 8, 9, 0 Select an option in the Main Menu (1 – 6) or enter a value
for a parameter in the parameter screen (0 – 9).
Escape Return to Main Menu or abort changes to a parameter.
Down Arrow View the next parameter.
Up Arrow View the previous parameter.
Right Arrow View the next value for a parameter. ➀
Left Arrow View the previous value for a parameter. ➀
Enter Save a value for a parameter.
➀ In some parameters the right and left arrow keys let you navigate through the bits.