Rockwell Automation 1762-IR4 RTD/Resistance Input Module - Manual (Page 87)

Publication 1762-UM003A-EN-P - February 2003
Configuring the 1762-IR4 Module Using RSLogix 500 B-5
Use the Calibration tab (Cal) to disable cyclic calibration. For more
information on the autocalibration feature, see Selecting
Enable/Disable Cyclic Autocalibration (Word 4, Bit 0) on page 3-20.
Generic Extra Data Configuration
This tab re-displays the configuration information entered on the
Analog Input Configuration screen in a raw data format. You have the
option of entering the configuration using this tab instead of the
module Configuration tab. You do not have to enter data in both
places.