Rockwell Automation 1769-IF4XOF2 Compact 8-Bit Low Resolution Analog I/O Combination Module - Manual (Page 17)

1 Publication 1769-UM008A-EN-P - November 2001
Chapter
2
Quick Start for Experienced Users
Before You Begin This chapter can help you to get started using the analog module. We
base the procedures here on the assumption that you have an
understanding of Allen-Bradley controllers. You should understand
electronic process control and be able to interpret the ladder logic
instructions required to generate the electronic signals that control your
application.
Because it is a start-up guide for experienced users, this chapter does not
contain detailed explanations about the procedures listed. It does,
however, reference other chapters in this book where you can get more
information about applying the procedures described in each step.
If you have any questions or are unfamiliar with the terms used or
concepts presented in the procedural steps, always read the referenced
chapters and other recommended documentation before trying to apply
the information.
Required Tools and
Equipment Have the following tools and equipment ready:
•
medium blade or cross-head screwdriver
•
analog input or output device
•
shielded, twisted-pair cable for wiring (Belden™ 8761 or equivalent)
•
controller (for example, a MicroLogix™ 1500 controller)
•
analog combination (1769-IF4XOF2) module
•
programming device and software (for example, RSLogix 500™)