Rockwell Automation 1769-IF4XOF2 Compact 8-Bit Low Resolution Analog I/O Combination Module - Manual (Page 22)

Publication 1769-UM008A-EN-P - November 2001
2-6 Quick Start for Experienced Users
a. Apply power.
b. Download your program, which contains the analog module
configuration settings, to the controller and put the controller into
Run mode.
c. During a normal start-up, the module status LED turns on.
d. If the module status LED does not turn on, cycle power. If the
condition persists, replace the module.
Module and channel configuration errors are reported to the
controller. These errors are typically reported in the controller’s I/O
status file. Check the controller’s I/O file.
Channel status data is also reported in the module’s input data table,
so these bits can be used in your control program to flag a channel
error. See Input Data File on page 4-3.
Step 6:
Start the system.
Reference
Chapter 5
(Module Diagnostics and
Troubleshooting)
Step 7:
Monitor the module status.
Reference
Chapter 6
(Module Diagnostics and
Troubleshooting)