Rockwell Automation 1769-IF4XOF2 Compact 8-Bit Low Resolution Analog I/O Combination Module User Manual
Page 19
Publication 1769-UM008A-EN-P - November 2001
Quick Start for Experienced Users 2-3
e. To allow communication between the controller and module,
move the bus lever fully to the left until it clicks. Ensure it is
locked firmly in place.
f. Attach an end cap terminator to the last module in the system by
using the tongue-and-groove slots as before.
g. Lock the end cap bus terminator.
Be sure to observe minimum spacing guidelines on page 3-7 for
adequate ventilation.
ATTENTION
!
When attaching I/O modules, it is very important
that the bus connectors are securely locked
together to ensure proper electrical connection.
ATTENTION
!
Remove power before removing or inserting this
module. When you remove or insert a module
with power applied, an electrical arc may occur.
Step 3:
Mount the I/O bank.
Reference
Chapter 3
(Installation and Wiring)