Rockwell Automation 1769-IF4XOF2 Compact 8-Bit Low Resolution Analog I/O Combination Module - Manual (Page 85)

Publication 1769-UM008A-EN-P - November 2001
Configuration Using the 1769-IF4XOF2 Combination Analog Module with a CompactLogix System C-5
Configuring the
1769-IF4XOF2 Analog
Combination Module When you add an I/O module into a CompactLogix system, the Input,
Output and Configuration tags are automatically created in the
Controller Tag base for that module.
For the case of the 1769-IF4XOF2, the following tags are created:
Local:s:I Input tag
Local:s:O Output tag
Local:s:C Configuration tag
where “s” is the slot number of the I/O module
The screen below shows the 1769-IF4XOF2 in slot 1.
Each of these tags is expanded by clicking on the plus sign to its left.
Click the plus sign to the left of the Configuration tag, then also click
the plus sign to the left of “Local:1:C.Data.”
TIP
When a Thin Profile is used, each of these tags and
their sub elements contain descriptive names, which
match the documentation for that module.