Rockwell Automation 1770-KF2 Data Highway or Highway Plus Interface Module User Manual User Manual
Page 122
Advertising
![background image](/manuals/579289/122/background.png)
Message Packet Formats
Chapter 5
5-43
Set to Single-Scan Test Mode
This command sets the selected controller to the Single-Scan Test mode.
Reply Format:
(EXT STS Byte Optional)
B.
Format When Reporting an Error
TNS
STS
CMD
4E
SRC
DST
TNS
STS
CMD
4E
SRC
DST
EXT
STS
A.
Format When Successful Execution
Command Format:
TNS
STS
CMD
0E
SRC
DST
FNC
04
PLC-4
SEL
Set to Test Mode
This command sets the selected controller to the Test mode.
Reply Format:
B.
Format When Reporting an Error (EXT STS Byte Optional)
TNS
STS
CMD
4E
SRC
DST
TNS
STS
CMD
4E
SRC
DST
EXT
STS
A.
Format When Successful Execution
Command Format:
TNS
STS
CMD
0E
SRC
DST
FNC
03
PLC-4
SEL
Advertising