Rockwell Automation 1770-KF2 Data Highway or Highway Plus Interface Module User Manual - Manual (Page 204)

General Asynchronous Link Error Codes
(STS, EXT STS)
Appendix C
CĆ4
EXT STS Codes for Command Code 0F (Hex)
The following table contains EXT STS codes (in hex) that you may find if
the command code is 0F (hex):
This
Code
Means
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
10
11
12
13
14 to FF
Not Used
Error in Converting Block Address
Less Levels Specified in Address Than Minimum for Any Address
More Levels Specified in Address Than System Supports
Symbol Not Found
Symbol Is of Improper Format
Address Doesn't Point to Something Usable
File Is Wrong Size
Cannot Complete Request, Situation Has Changed Since Start of Command
File Is Too Large
Transaction Size Plus Word Address Is Too Large
Access Denied, Improper Privilege
Condition Cannot Be Generated
Condition Already Exists
Shutdown Could Not be Executed
Requestor Does Not Have Upload or Download Access
Histogram Overflow
Illegal Data Type
Bad Parameter
Address Reference Exists to Deleted Data Table
Not Used