Rockwell Automation 1746-HSRV SLC Servo Control Module User Manual - Manual (Page 36)

1 Publication 1746-6.1.2 - July 2000
Chapter
4
Installing Your SLC Servo Module
This chapter provides guidelines for installing your SLC Servo Module
and includes the following topics:
•
Unpacking and inspecting the SLC Servo Module system
•
Installing the SLC Servo Module
•
Grounding the SLC Servo Module
•
Mounting the termination panel
•
Connecting the termination panel
Unpacking and Inspecting
Your SLC Servo Module
System
ATTENTION
!
Before removing the contents from the shipping
carton, avoid electrostatic discharge that degrades
performances and damages the module by doing the
following:
•
Touch a grounded object to eliminate static
charge from your body before handling the
module.
•
Wear a wrist strap (for example, catalog number
8000-XESD) that provides a high-resistance path
to ground.
•
Keep the module in its static-shield bag when not
in use.
For more information about electrostatic discharge
and how to guard against it, refer to Guarding
Against Electrostatic Damage - Using the ESD Kit
(publication 8000-4.5.2).