Rockwell Automation 1746-HSRV SLC Servo Control Module User Manual - Manual (Page 86)

Publication 1746-6.1.2 - July 2000
Setting Up Your SLC Servo Module 7-7
Configuring Your Processor Using RSLogix 500 Software
Use the table below to determine which configuration procedure to
follow.
Automatically Configuring the SLC Servo Module
To configure your SLC Servo Module automatically:
1. From the menu bar, select File. The File menu appears.
2. Select New. The Select Processor Type window appears.
3. Assign a name for your new RSLogix 500 project file and type it
in the Processor Name field.
4. Select your SLC processor from the list of processor types.
Default values assigned to the selected processor appear in the
Communications Setting area.
5. Select OK. The processor database is initialized and the RSLogix
500 navigator window appears with the name you typed in the
Processor Name field.
When Working: Go to:
Online Automatically Configuring the SLC Servo
Module
Offline Manually Configuring the SLC Servo Module