Rockwell Automation 1790D-NOV2/TNOV2 CompactBlock LDX Analog Modules - Manual (Page 13)

Publication 1790-UM001A-EN-P - March 2002
Overview 1-3
Hardware Features
The modules contain either removable D-shell connectors or fixed
terminal blocks. The CompactBlock LDX four input channels are
single-ended. The CompactBlock LDX two output channels are also
single-ended. Module configuration is normally done via the
controller’s programming software. In addition, some controllers
support configuration via the user program.
Figure 1.1 shows the CompactBlock LDX analog modules’ hardware
features.
Figure 1.1
DIN rail slot
DeviceNet
network
connector
Panel
mount
hole Analog I/O
connections
(D-shell shown)
Panel
mount
hole Node
address
switches
Expansion connector
under cover
Module
indicators
43218