Rockwell Automation 1790D-NOV2/TNOV2 CompactBlock LDX Analog Modules - Manual (Page 85)

Publication 1790-UM001A-EN-P - March 2002
PROFIBUS Modules Installation, Wiring, Module Data, Status and Channel Configuration B-17
Configuring Analog
Modules with the SST
PROFIBUS Configuration
Tool The following configuration example shows how to configure your
analog modules with the SST PROFIBUS configuration tool. Follow
these steps:
1. Open your SST PROFIBUS configuration tool. If you are online,
make sure the processor is in Program mode.
2. Add the PROFIBUS master to your network.
3. Double-click on the master’s icon to see the device properties
pop-up screens. The first screen is the General properties.
A. Open the Masters
and the SST folders.
B. Choose your
PROFIBUS master.
C. Drag and drop the
master onto the
network.
Change any necessary
information and either:
•
click to another tab
•
click OK