Rockwell Automation 1790D-NOV2/TNOV2 CompactBlock LDX Analog Modules - Manual (Page 54)

Publication 1790-UM001A-EN-P - March 2002
4-10 Module Data, Status, and Channel Configuration for Analog Output Modules
Use the Parameters tab to change module configuration. For example,
the screen below shows how to change the Autobaud selection.
The screen returns to "Module Configuration".
C. Use the pull-down menu to
change range selection.
D. Click on OK after making all
configuration changes.
A. Click on Download to save
your configuration.
B. Click on OK after making all
configuration changes.