Rockwell Automation 1790D-NOV2/TNOV2 CompactBlock LDX Analog Modules - Manual (Page 43)

Publication 1790-UM001A-EN-P - March 2002
Module Data, Status, and Channel Configuration for Analog Input Modules 3-9
4. Click on the Module Configuration tab. Analog input modules
have a configuration screen similar to the screen shown below
for the 1790D-N4C0 module.
Use the Parameters tab to change module configuration. For example,
the screen below shows how to change an AMP range selection.
A. Click on the catalog number. B. Click on Properties.
C. Use the pull-down menu to
change range selection.
D. Click on OK after making all
configuration changes.