Rockwell Automation 1790D-NOV2/TNOV2 CompactBlock LDX Analog Modules - Manual (Page 67)

Publication 1790-UM001A-EN-P - March 2002
Specifications A-5
4-Channel Analog Voltage Input Module
1790D-TN4V0
Inputs per module 4 channel single-ended, non-isolated
Input Voltage 0-10V
Resolution 12 bits-unipolar
1/4096 maximum
2.44mV/bit
Converted Data Binary data
0000 to 0fff (max scale)
Conversion Time 10ms/channel
Overall accuracy 0.2% Full scale @0°-55°C
Calibration None required
Input Impedance 500K
Ω
minimum
Insulation Resistance 20M
Ω
minimum @ 250V dc (between insulated circuits)
General Specifications
DeviceNet Power Supply voltage - 24V dc nominal
Voltage range - 11-28.8V dc
Power dissipation - 1.2W maximum @ 28.8V dc
Field Power Supply Voltage - 24Vdc nominal
Voltage Range - 21.6-26.4V dc (+10%)
Power Dissipation - 1.5W maximum @26.4V dc
Isolation I/O to logic: photocoupler isolation
Isolation voltage: Type Test 1250V ac rms for 60 seconds
DeviceNet to logic: non-isolated
Field power: non-isolated
Indicators 4 red/green I/O status
Wiring Terminal block connector
Screw torque: 7 inch pounds maximum
IMPORTANT: This analog base module can accommodate a maximum of two discrete
expansion modules.