Rockwell Automation 1790D-NOV2/TNOV2 CompactBlock LDX Analog Modules - Manual (Page 88)

Publication 1790-UM001A-EN-P - March 2002
B-20 PROFIBUS Modules Installation, Wiring, Module Data, Status and Channel Configuration
8. Set the I/O type. This screen also shows the data size
information.
9. Set the Watchdog Time Base and Current Range.
10. Save the configuration file.
A. Click on the SLC
Addresses tab.
B. Choose the Input.
This example uses
the I Type input.
A. Click on the Ext.
Prms tab.
B. Use the pull-down
menu to change
the Watchdog
Time Base.
C. Use the pull-down
menu to change
the Current Range.
D. Click OK when
finished.