Rockwell Automation 1790D-NOV2/TNOV2 CompactBlock LDX Analog Modules - Manual (Page 87)

Publication 1790-UM001A-EN-P - March 2002
PROFIBUS Modules Installation, Wiring, Module Data, Status and Channel Configuration B-19
6. Use the pop-up screen shown below to change the module’s
properties.
7. If necessary, add additional modules as shown below.
The following screen appears to add modules.
Up to two expansion modules may be added to analog
base modules.
A. Make sure the
station number
is correct.
B. Click on other
tabs or OK
when finished
on this screen.
A. Click on the
Modules tab.
B. Click on Add.
C. Choose the
module.
D. Click on OK.