Rockwell Automation 1790D-NOV2/TNOV2 CompactBlock LDX Analog Modules - Manual (Page 42)

Publication 1790-UM001A-EN-P - March 2002
3-8 Module Data, Status, and Channel Configuration for Analog Input Modules
Configuring Analog
Modules With RSNetWorx To configure analog modules, proceed as described in the steps
below:
1. Open RSNetWorx for DeviceNet.
2. Add an analog input module (e.g. 1790D-N4C0) to the network,
as shown below..
3. Double-click on the module icon on the DeviceNet network. If
you are online, upload the configuration and existing module
parameters are shown. A page similar to the one below appears.
A. Use the + signs to open the
following path:
DeviceNet
Õ
Vendor
Õ
Rockwell Automation -
Allen-Bradley
Õ
Rockwell Automation
miscellaneous
B. Double-click on the module.
It appears on the network.