Rockwell Automation 1784-PKTCS ControlNet PCI Scanner Card Installation Instrucitons - Manual (Page 11)

Publication 1784-IN042A-EN-P - April 2005
Chapter
1
Install IOLinx
Uninstall the Previous Version of IOLinx
1. Shut down all applications that use the IOLinx ControlNet Driver, including RSLinx
and SoftLogix.
2. Click on IOLinx for ControlNet to remove it.
3. Select Remove.
For Information On This Topic Refer To Page
Uninstall the Previous Version of IOLinx 1-1
Install IOLinxInstall IOLinx 1-2
IMPORTANT
Do not install the 1784-PKTCS ControlNet Universal PCI scanner card
in the same PC as a 1784-KTCS ControlNet ISA-bus scanner card. Before
installing the 1784-PKTCS card, remove all the 1784-KTCS cards and
uninstall the associated drivers.
IMPORTANT
Before you update the new driver and IOLinx, you must uninstall any
earlier versions of IOLinx. If you do not currently have IOLinx installed,
go to the Install IOLinx procedure on page 1-2.
in this operating system: select:
Windows 2000 Start ⇒Settings ⇒Control Panel, then double-click the
Add/Remove Programs icon
Windows XP Start ⇒Control Panel ⇒Add or Remove Programs, or
Start ⇒Control Panel, then double-click the Add or Remove
Programs icon