Rockwell Automation 1784-PKTCS ControlNet PCI Scanner Card Installation Instrucitons - Manual (Page 55)

Use IOView to Verify the Configuration 6-15
Publication 1784-IN042A-EN-P - April 2005
Manually Enter Values
To manually enter the output values:
1. On the IOView screen, select Manual from the Output Pattern pull-down list.
2. In the Output data area of the IOView screen, enter the desired output values.
Select a Pre-determined Output Pattern
When you select a setting other than Manual, IOView automatically generates the output data
based on the selected pattern. To select a pre-determined output pattern, select a setting other
than Manual from the Output Pattern pull-down list.
Select Manual
from the Output
Pattern pull-down
list.
Enter the desired
output values here.