Rockwell Automation 1784-PKTCS ControlNet PCI Scanner Card Installation Instrucitons - Manual (Page 17)

Publication 1784-IN042A-EN-P - April 2005
Chapter
2
Install the 1784-PKTCS Card
Before You Begin
To install the card, you need to:
• access the computer’s expansion slots
• insert the card into the computer
For Information On This Topic Refer To Page
Before You Begin 2-1
Access the Computer’s PCI Local Bus Expansion Slots 2-2
Insert the Card into the Computer 2-2
Connect to the Network 2-3
Connect the Card Directly to the ControlNet Network 2-5
Connect to a Device on the ControlNet Network 2-6
IMPORTANT
The card’s dimensions are shown below.
4.2 in.
10.7 cm
6.5 in.
16.5 cm
31474-M