Rockwell Automation 1784-PKTCS ControlNet PCI Scanner Card Installation Instrucitons - Manual (Page 36)

4-4 Install the Driver in Windows 2000
Publication 1784-IN042A-EN-P - April 2005
7. In the Found New hardware wizard, click Browse and browse to this location:
x:\Program Files\Rockwell Software\IOLinx\IOLinx for
ControlNet\Drivers\abpktcs.inf
where x:\ is the drive where IOLinx is installed.
8. Click Open.
9. Click OK.
10. Click Next to install the new driver.
11. Click Finish to close the Found New Hardware Wizard.
12. Shut down and re-start the PC.
The driver is now ready to use. Go on to Chapter 5.
Update the Existing Driver in Windows 2000
IMPORTANT
If prompted to overwrite existing files, click Yes.
IMPORTANT
Use this procedure only if you have previously installed the 1784-PKTCS
driver and IOLinx on this computer. If you have not previously installed
the 1784-PKTCS driver and IOLinx on this computer, use the Install the
Driver in Windows 2000 for the First Time procedure on page 4-1
instead of this procedure.
IMPORTANT
During the update procedure, communication through the card will be
disrupted.