Rockwell Automation 1784-PKTCS ControlNet PCI Scanner Card Installation Instrucitons - Manual (Page 42)

5-2 Once You Have Completed the Installation
Publication 1784-IN042A-EN-P - April 2005
Configure the Card
Use the IOLinx configuration application to set the card’s ControlNet node address, IOLinx
port number, and virtual backplane slot.
1. If the IOlinx gears do not appear in the system tray, start the IOLinx configuration
application by selecting Start ⇒Programs ⇒Rockwell Software ⇒IOLinx for
ControlNet ⇒IOLinx for ControlNet.
2. Open the IOLinx configuration application by double-clicking the IOLinx gears in
the system tray.
3. Double-click the row corresponding to the scanner card you want to configure.
TIP
The IOLinx configuration application shows all of the installed cards.
Be certain to select the correct card.
IOLinx gears
double-click the card you want
to configure