Rockwell Automation 1784-PKTCS ControlNet PCI Scanner Card Installation Instrucitons - Manual (Page 51)

Publication 1784-IN042A-EN-P - April 2005
Chapter
6
Use IOView to Verify the Configuration
Included with the IOLinx for 1784-PKTCS driver CD is a stand-alone test application (called
IOView.exe) that lets you diagnose simple problems over the network before the control
application is available for integration.
In addition, you can use the test application to make certain that the 1784-PKTCS card has
been correctly installed and is functioning in the PC.
Before You Begin
Before you begin, you must have done the following:
• Installed the card
• Connected it to the ControlNet network, and
• Used RSNetWorx for ControlNet to load a scan list into the card
For Information On This Topic Refer To Page
Before You Begin 6-11
Start IOView 6-12
Create a View 6-12
Read Inputs and Write Outputs 6-14
Change the View State 6-16
Delete a View 6-16