Rockwell Automation 1784-PKTCS ControlNet PCI Scanner Card Installation Instrucitons - Manual (Page 52)

6-12 Use IOView to Verify the Configuration
Publication 1784-IN042A-EN-P - April 2005
Start IOView
The test application IOView is automatically installed as part of the driver installation
procedure.
To start IOView, click Start ⇒ Programs ⇒ Rockwell Software ⇒ IOLinx ⇒ IOLinx for
ControlNet ⇒ Samples ⇒ IOView.
Create a View
The 1784-PKTCS card supports Network views and I/O Set (IoSet) views. A Network view
encapsulates I/O data from all of the devices in the scan list. The data is organized according
to the input and output addresses that you entered with the scanner configuration tool in
RSNetWorx for ControlNet.
An I/O Set view encapsulates I/O data from one specified scan list entry. A scan list entry is
specified by the Entry Name that you entered with the scanner configuration tool in
RSNetWorx for ControlNet.
To create a view, follow these steps:
1. In IOView, select the port number of the 1784-PKTCS card for which you want to
create a view.
TIP
You may invoke multiple instances of IOView at the same time.