Rockwell Automation 1784-PKTCS ControlNet PCI Scanner Card Installation Instrucitons - Manual (Page 29)

Install the Driver in Windows XP 3-3
Publication 1784-IN042A-EN-P - April 2005
6. In the Found New Hardware wizard, click Browse and browse to this location:
x:\Program Files\Rockwell Software\IOLinx\IOLinx for ControlNet\Drivers
where x:\ is the drive where IOLinx is installed.
7. Click OK.
8. Click Next.
9. Click Finish.
10. Shut down and re-start the PC.
The driver is now ready to use. Go on to Chapter 5.
Update the Existing Driver in Windows XP
1. Select Start.
2. Right-click My Computer.
IMPORTANT
If prompted to overwrite existing files, click Yes.
IMPORTANT
Use this procedure only if you have previously installed the 1784-PKTCS
driver and IOLinx on this computer. If you have not previously installed
the 1784-PKTCS driver and IOLinx on this computer, use the Install the
Driver in Windows XP for the First Time procedure on page 3-1 instead
of this procedure.
IMPORTANT
During the update procedure, communication through the card will be
disrupted.