Rockwell Automation 1784-PKTCS ControlNet PCI Scanner Card Installation Instrucitons - Manual (Page 24)

2-8 Install the 1784-PKTCS Card
Publication 1784-IN042A-EN-P - April 2005
Figure 2.4 Connect a programming terminal to a ControlNet network through
another ControlNet device
ATTENTION
If the 1784-PKTCS card is using scheduled communication to control
I/O, or produce or consume tags, do not use the 1786-CP cable to
connect the card to the ControlNet network. Instead, connect the
card directly to the ControlNet network as shown in Figure 2.2.
1 The 1786-CP cable can be plugged into any ControlNet product’s NAP to provide programming capability on
the ControlNet network. When you connect a programming terminal through this cable, it is counted as a
node and must have a unique address.
ControlNet network
Programming
terminal
1784-PKTCS
1786-CP cable 1
ControlNet
product
42199