Rockwell Automation 9323-PA2E APS SLC 500 Import/Export Utility User Manual - Manual (Page 14)

Configuring the APS Import/Export Utility
2-3
Table 2.A
Specifying User Directories or Choosing between Color and
Monochrome Screens
If you want to: Press: Then:
specify the user directories
[F1] - DEFINE DIR
see the following section, Specifying the
User Directories.
choose between color or
monochrome displays ➀
[F3] - COLOR SELECT
toggle between COLOR and
MONOCHROME ➁ , then press [F9] -
SAVE CONFIG or
[ESC]
after making
your choice.
save the configuration
permanently
[F9] - SAVE CONFIG
APSIE saves the configuration to the
user preference file.
➀ You must have a color adaptor card and color monitor to use the color selection.
➁ Indicates the user preference default.