Rockwell Automation 9323-PA2E APS SLC 500 Import/Export Utility User Manual - Manual (Page 33)

Preface
APS Import/Export Utility User Manual
4-8
Table 4.C
Selecting the Export Address Types Individually
If you want to: Toggle: Until the status is:
export all of the program
documentation for
addresses of the type that
you have highlighted.
[F1] - TOGGLE
YES
export none of the program
documentation for
addresses of the type that
you have highlighted.
[F1] - TOGGLE
ENTRY
NO
If you want to: Press: Then:
use this configuration for the
session only [ENTER]
or
[ESC]
APSIE accepts any changes that were
made. Once APSIE is terminated, the
changes are discarded.
discard any changes that
were made [ALT–U]
APSIE discards any changes that were
made and returns the previous display.
Table 4.D
Selecting All or None of the Export Address Types
If you want to: Press:
export all of the program
documentation for all
address types.
[F2] - ALL YES
export none of the program
documentation for any
address type.
[F3] - ALL NO
use this configuration for the
session only and return to
the previous display
[ENTER]
or
[ESC]
discard any changes that
were made and return to the
previous display
[ALT–U]