Rockwell Automation 9323-PA2E APS SLC 500 Import/Export Utility User Manual - Manual (Page 8)

Introducing the APS Import/Export Utility
1-3
Running the Software
To run the APSIE software, follow these steps:
1. If necessary, change the drive specifier to the drive where the software is
installed (typically C). To do this, type:
C: and press [ENTER] .
2. If you are using the default directory, at the DOS prompt, type:
CD \IPDS\ATTACH\SLC500 and press [ENTER] .
If you specified a different directory path, change to that directory and press
[ENTER] .
3. Type: APSIE and press [ENTER] . The import/export utility displays the
main screen.
Mon July 18, 1994
This software is licensed to: Your Name
Your Company
0000000000
Rockwell Software Incorporated, Copyright 1989–1995
9323 – PA2E
All Rights Reserved
SLC–500 APS IMPORT/EXPORT UTILITY
Press a function key
11:03:09 am
4. Become familiar with the APSIE display format and menu on pages 1-4 and
1-5. Then, go to the next section, Starting the Utility, to perform a task from
the main menu.