Rockwell Automation 9323-PA2E APS SLC 500 Import/Export Utility User Manual - Manual (Page 37)

Preface
APS Import/Export Utility User Manual
5-2
Explaining Keywords, Operands, and Comments
Each section of the ASCII archive file usually consists of keywords, operands, and
comments.
Keywords
Keywords include symbols and ladder instruction mnemonics. Table 5.A explains
the location of each keyword in the ASCII archive file.
Table 5.A
Defining Keywords
This Keyword Precedes
START the start of an ASCII file.
RACK the definition of an expansion chassis. (does not apply to MicroLogix
1000 controllers)
SLOT the definition of an I/O module. (does not apply to MicroLogix 1000
controllers)
These keywords are used in conjunction with SLOT
(SLC 5/02, SLC 5/03, and SLC 5/04 processors only)
D SCAN_IN Number of scanned inputs.
D SCAN_OUT Number of scanned outputs.
D M1_SIZE Number of M1 data file words.
D M0_SIZE Number of M0 data file words.
D ISR Interrupt service routine file number.
D G_FILE Data for G-file.
DATA the definition of a data table file.
PROJECT the project name and ladder filenames.
LADDER the definition of a ladder file.
FORCE the definition of a force table.
CHAN_CONFIG the definition of a channel configuration file. (SLC 5/03 and SLC 5/04
processors only)
INPUT_FILTERS the definition of an input filter file. (MicroLogix 1000 controllers only)
MULTIPOINT the definition of an I/O list. (SLC 5/03 OS302, SLC 5/04 OS401, and
MicroLogix 1000 controllers only)
The SLC 5/03 and SLC 5/04 processors have three keywords that indicate that a file
is protected. See table 5.B.