Rockwell Automation 9323-PA2E APS SLC 500 Import/Export Utility User Manual - Manual (Page 25)

Preface
APS Import/Export Utility User Manual
3-8
Examining the Results of the Import
The log file provides the results of the import. It lists any errors that the utility
encountered during the import process. For each error, it identifies the type of error
and the location where the error was encountered in the ASCII file. “Illegal
Addresses” and “Illegal Comments” are two examples of errors that you may
encounter.
The default location for the log file is \IPDS\TEXT\SLC500. The log filename
consists of the APSIE archive path, which you defined while configuring the import
utility using
[F6] ASCII DIR , the destination file name which you defined in
the import utility using [F4] ENTER DESTIN , and the file extension .LOG.
APSIE also allows you to verify that a new archive file was created. The default
location for the archive file is \IPDS\ARCH\SLC500. The archive filename consists
of the destination filename and the file extension .ACH.