Rockwell Automation 9323-PA2E APS SLC 500 Import/Export Utility User Manual - Manual (Page 84)

Preface
APS Import/Export Utility User Manual
6-6
Placing Symbols
A symbol is a 10–character name associated with an address. IBM extended
characters can be used as part of symbols.
You start a symbol with a letter from A to Z. To complete the symbol, you can use
any combination of ASCII characters except 0x00 through 0x2F and 0x3A through
0x3F.
The following are examples of symbols:
SYM O:3.1/8 UPLOAD
SYM O:5.2/3 EMPTY_LINE
SYM I:1.1/8 PALLET
Keywords
ASCII Instruction Addresses
ASCII Address Symbols