Rockwell Automation 9323-PA2E APS SLC 500 Import/Export Utility User Manual - Manual (Page 48)

Creating an ASCII Archive File
5-13
Configuring the I/O Slots (Does Not Apply to MicroLogix 1000 Controllers)
There are three formats that you can use to define the I/O slot configuration. The
format that you use depends on your module. See table 5.L.
Table 5.L
Determining which I/O Slot Format to Use
If your module:
Use the following I/O Slot Format
(Core Elements):
Use these
optional
arguments with
the core elements
for Modular
Controllers only:
is listed in Table 5.M
(Format 1)
SLOT Slot_number Catalog_number
SCAN_IN x
SCAN_OUT x
M0 SIZE x
is not included in Table 5.M
and the module ID number is
not 63xx, 95xx, 127xx, 159xx,
199xx, 223xx, or 255xx
(Formal 2)
SLOT Slot_number Module_ID
M0_SIZE x
M1_SIZE x
ISR x
G FILE g_file_size
is not included in Table 5.M
and the module ID is 63xx,
95xx, 127xx, 159xx, 199xx,
223xx, or 255xx
(Format 3)
SLOT Slot_number
Extended_module_ID Max_input
Max_output
g_ _
g_file_data . . .
(See Table 5.N for
greater detail on
the optional
arguments.)