Bus torque specifications – Rockwell Automation 2100 CENTERLINE Low Voltage Motor Control Centers User Manual
Page 40
Advertising
40
Rockwell Automation Publication 2100-IN012E-EN-P - February 2012
Chapter 2 Installation Procedures
Bus Torque Specifications
Tighten all bus splice connections with a torque wrench and socket at intervals
established by your maintenance policy. See
Chapter 9
for suggested
maintenance. If a torque wrench is not available, tighten until the conical spring
washer is flat.
Torque values can be found on the information label on the interior of the vertical
wireway door or on the interior right-hand side plate of frame mounted units.
Advertising