Rockwell Automation 2100 CENTERLINE Low Voltage Motor Control Centers - Manual (Page 66)

66 Rockwell Automation Publication 2100-IN012E-EN-P - February 2012
Chapter 6 Operator Handle and Unit Interlock
Figure 30 - Defeater Lever for Horizontal Operating Handle
Locking Provisions Refer to the following sections for locking provisions.
Lock Vertical Operating Handles in the OFF/O Position
To lock the small, medium, and large operator handle in the OFF/O position, put
the shackle of the lock through the opening in the operator handle assembly. The
opening can accommodate up to three padlocks.
Figure 31 - Locking Vertical Handles in OFF/O Position
ATTENTION: When working on or near energized electrical equipment,
follow established electrical safety-related work practices. Refer to NFPA
70E Standard for Electrical Safety in the Workplace.
Small and Medium Vertical Handle Large Handle