Energize a unit with the unit door open – Rockwell Automation 2100 CENTERLINE Low Voltage Motor Control Centers  User Manual

Page 65

Advertising
background image

Rockwell Automation Publication 2100-IN012E-EN-P - February 2012

65

Operator Handle and Unit Interlock Chapter 6

Energize a Unit with the Unit Door Open

When the unit door is open and the operator handle is in the OFF/O position,
the defeater lever must be deliberately lifted on the vertical handles or pushed to
the left for horizontal handles, to move the operator handle to the ON/I
position, and energize the unit.

Figure 29 - Defeater Lever for Vertical Operator Handle

ATTENTION: When working on or near energized electrical equipment,
follow established electrical safety-related work practices. Refer to NFPA
70E Standard for Electrical Safety in the Workplace.

Personal protective equipment (PPE) is not shown for clarity.

ATTENTION: When working on or near energized electrical equipment,
follow established electrical safety-related work practices. Refer to NFPA
70E Standard for Electrical Safety in the Workplace.

Personal protective equipment (PPE) is not shown for clarity.

Advertising